Resolution 777 and the New STFC Framework: What Changes for Providers

Anatel recently published Resolution No. 777. This standard brings profound changes to the telecommunications landscape. It approves the new General Regulation for Telecommunication Services. The main focus is updating the rules for STFC and SCM. There is also an extensive review of old resolutions. For providers and carriers, understanding these changes is vital. The operational and financial impact is significant. The text below details what really matters for your day to day.

What is Resolution 777

Resolution 777 consolidates various standards into a single document. It revokes more than 40 old resolutions. The goal is to modernize the regulation. It creates a more unified environment for STFC, SMP, and SCM. However, the point of attention for the market lies in the details of numbering and network infrastructure. The standard redefines technical obligations for service providers.

Changes in STFC Numbering

One of the most relevant points deals with numbering. Article 11 of the resolution alters the classification of codes. The digits from "2" to "5" are now defined specifically for the Fixed Switched Telephone Service. This brings clarity to the use of these resources. However, implementation is not immediate.

Ruling No. 202, dated August 14, 2025, established a timeline. The deployment of new STFC Local Areas will be phased. This means that the changes in numbering come into force on March 1, 2027. You have time, but you need to start planning now.

The Impact for SCM Providers

If you are an SCM provider using E.164 numbering, pay attention. The resolution brings a specific connectivity requirement. Paragraph 7 of Article 72 is decisive. It obliges SCM providers to have interconnection points.

The rule states that you must have at least one POI or PPI for telephone traffic. This must occur in each geographic area with the same National Code. If you use public numbering in several regions, you need physical or logical presence in all of them. This changes the way you design the network topology.

The Question of POIs and PPIs

POI means Point of Interconnection. PPI is the Interconnection Protocol Point. The requirement to have these points in each National Code area is an engineering challenge. Before, many providers centralized traffic. Now, decentralization may be mandatory.

This directly impacts operation costs. You may need to rent racks in new data centers or hire transport links. Your network capacity planning needs to revisit this requirement. Your carrier's SoftSwitch or SBC must support this geographic distribution.

Service Suspension and Consumer Rights

The resolution also touches on the management of service suspension. Article 72 defines that SMP, STFC, and SCM providers must guarantee consumer rights. During suspension, specific rules for access and information must be observed.

For the provider, this means reviewing billing and activation systems. Your BSS needs to be aligned to ensure the customer is not left without essential communications improperly. Automating these processes is the best way to avoid sanctions.

Deadlines and Timelines

The deadlines in this resolution are a key point. Several articles had their effective date postponed. Ruling No. 202/2025 is the document that defines the dates. Most rules related to the new Local Areas apply from March 1, 2027.

This period of almost two years is a window of opportunity. Use this time to adapt your infrastructure. Do not leave it to the last minute. Network topology and routing changes take time to be tested and validated.

What the Provider Needs to Do

The first action is to map where your E.164 numbering is active. Check in which National Codes you operate. Then, check if you have POI or PPI in all these areas. If there is a gap, start the expansion project.

Review your data transport contracts. You may need new links to connect the interconnection points. Also evaluate your SoftSwitch. It needs to manage routing between these new points efficiently.

In addition, follow Anatel communications. The structured timeline may have updates. Be aligned with class associations to discuss sectoral impacts.

Conclusion

Resolution 777 modernizes the sector, but brings strict infrastructure requirements. The mandatory nature of POIs in each National Code changes the game for SCM providers. The deadline until 2027 seems long, but the technical complexity requires early action. Those who prepare first will have a competitive advantage and avoid fines. Keep your focus on network quality and regulatory compliance.